Lightwight Switching Power Audio Amplifiers (FP10000Q)
Professional Power Amplifier
1) Minimum power-to-weight ratio
2) Minimum power-to-volume ratio
3) Zero heat insulation cooling system
4) Segmented analysis on system temperature
5) Transistors line-up at zero thermal path difference
6) Cumulative analysis on high frequency power
7) Accurate power dispatching
8) Real-time / Online detecting of load resistance
9) Dynamic adjusting and analysis on the integrated output
10) Complete 2-channel, 2U amplifier series
11) Maximum output power up to 2350W@8ohms
12) Refined SMD production technology
13) All-round circuit soft protection without anintemal circuit break
14) S/N ratio more than 112dB even higher
15) High damper factor over 800
16) High slew rate as high as 100V/us
17) low impedance loading
Specifications:
| 4 Channel Professional Line Array Audio Power Amplifiers (FP10000Q) |
| ITEM |
FP10000Q |
| Output Power |
20-20kHz, 1W with 1 KHz |
| 8ΩStereo Power(RMS) |
1350WX4 |
| 4ΩStereo Power(RMS) |
2100WX4 |
| 2ΩStereo Power(RMS) |
2500WX4 |
| 8ΩBridged Power(RMS) |
4200WX2 |
| 4ΩBridged Power(RMS) |
5000WX2 |
| Frequency Response(+o/-0.3dB,1W/8Ω) |
20 Hz - 34 kHz |
| THD 20 Hz - 20 kHz for 1 W |
<0.1% |
| Signal-to-Noise Ratio |
>112 Dba |
| Channel separation (Crosstalk) at 1 kHz |
>70 dB |
| Input Connectors (per channel) |
3-pin XLR, electronically balanced |
| Output Connectors (per channel) |
Binding Posts 2-pole |
| Class |
TD |
| TourClass Protection |
short circuit, DC voltage, turn-on/off transient, current, inrush |
| Operating voltage |
130-265 V / 65-135 V selectable |
| Voltage Gain(dB) |
23, 26, 29, 32, 35, 38, 41, 44 dB selectable |
| Input impedance |
20 Kohms |
| Level adjustment (per ch.) |
Front-panel potentiometer, 31 position detented from -inf to 0 dB |
| Dimensions (W×H×D) |
483×88×396mm |
| Packing dimension |
560×180×500mm |
| Net weight(kg) |
13 |
| Gross weight(kg) |
18 |
Audited Supplier 
){kind=link}
){kind=link}