| Type: | Professional Amplifier |
|---|---|
| Usage: | AV, KTV System, Stage |
| Used For: | Professional |
| Tube Type: | Transistor Amplifier |
| Function: | Post Amplifier, Amplifier Combined, Pre-amplifier |
| Sound Channel: | 3.1 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier D3 1800W+900W+900W Class D 3CH DSP Active Amplifier Module
Overview
D3 is a professional 3 channel class D active power amplifier module with DSP.
Its installation is 312mm x 190mm X 120mm .
8Ω Power -- L:1500W + M:500W + H:500W
4Ω Power -- L:1800W + M:700W + H:700W
Specifications
| ITEM | D3 | |||
| 8Ω Power | L:1500W + M:500W + H:500W | |||
| 4Ω Power | L:1800W + M:700W + H:700W | |||
| Frequency Response | 20Hz-20KHz ±1dB | |||
| THD+N 1KHz 1W 8Ω | <0.1% | |||
| Signal to Noise Ratio 1KHz | >100dB | |||
| Channel Separation 1KHz | >80dB | |||
| Class | D | |||
| Protection | Short,DCP,OVP,UVP,OCP,OTP | |||
| Operating Voltage | 90V-135V / 180V-265V | |||
| Input Sensitivity | 0.77V | |||
| Input Impedance | 20KΩ | |||
| DSP Fuction | MUTE,Polarity,Gain,Delay, Limiter,Mixer,EQ,XOver |
|||
| DSP Control | USB and RS-485 | |||
| Dimensions(W×H×D) | 312×190×120mm | |||
| Packing Dimension | 350×210×150mm | |||
| Net Weight(kg) | 4.9 | |||
| Gross Weight(kg) |
5.9 |
|||
Important Note
ATTENTION: This unit must be protected from damp because of the risk of fire and the
possibility of electric shocks
1. Make sure that you have the correct mains voltage. Only operate the unit at the mains
voltage marked on the rear panel.
2. Make sure that nothing especially no metal objects are inserted into the device. This
could result in electric shock or malfunction.
3. If the unit is subjected to extreme fluctuations of temperature e.g. On being transported
from outside into a heated room, condensation can form. This unit should n ot be used untill
it has reached room temperature.
4. In the event of water or any other fluid being accidentally spilt on the unit switch the
unit off immediately and send it to a qualified service workshop for inspection.
5. Make sure that the unit is always well ventilated and never exposed to direct sunlight
6. Do not use sprays to clean the unit as they have a detrimental effect on the unit and could
ignite suddenly.
7. The machine use single power switch, please cut off the power before fix.
8. Please do not put the cup, vessel of flower or container above the machine, in case the
leak out water then cause the leakage current off the machine.
Company Home Page: https://cnsanway.en.made-in-china.com/
Facebook Home Page: https://cnsanway.en.made-in-china.com/
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}