| Customization: | Available |
|---|---|
| Home Audio & Theater Speaker Mount: | Wall Mount |
| Home Audio & Theater Watts Per Channel: | >650W |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
14000 Watts High Power Subwoofer Speaker Amplifier FB-14K
We use large current rectifier bridge to make sure the unobstructed supply current. Using independent shielding way in the high-voltage power part, able to reduce the interference to audio signal to the lowest level, and make sure the higher safety for electricity.
We use high performance audion; make the system can bear larger current, with better dynamic and safety. Each audion has to be checked strictly, make sure the consistency of amplifier and minimum distortion.
We use the way of mainboard power-supply for the process the audio signal, able to make the voltage more stable, clear and thick, and sounds much better. Reasonable wiring can reduce the interference between channels and input-output.
1. Very high power and channel density;
2. Class TD amplifier topology;
3. Regulated Switch Mode Power Supply;
4. Efficient cooling system;
5. Adjustable parameters;
6. Comprehensive protection and warning;
7. XLR input connectors;
8. Heavy-duty binding post or Speakon output connectors.
1. Conference centres;
2. Museums;
3. Sports venues;
4. Home theaters;
5. Churches;
6. Shopping malls,
7. Restaurants.
|
ITEM |
FB-13K |
|
Output Power |
20-20kHz, 1W with 1 KHz |
|
8ΩStereo Power(RMS) |
2350WX2 |
|
4ΩStereo Power(RMS) |
4400WX2 |
|
2ΩStereo Power(RMS) |
6500WX2 |
|
8ΩBridged Power(RMS) |
8800W |
|
4ΩBridged Power(RMS) |
13000W |
|
Frequency Response(+o/-0.3dB,1W/8Ω) |
20 Hz - 34 kHz |
|
THD 20 Hz - 20 kHz for 1 W |
<0.1% |
|
Signal-to-Noise Ratio |
>112 Dba |
|
Channel separation (Crosstalk) at 1 kHz |
>70 dB |
|
Input Connectors (per channel) |
3-pin XLR, electronically balanced |
|
Output Connectors (per channel) |
Binding Posts 2-pole |
|
Class |
TD |
|
TourClass Protection |
short circuit, DC voltage, turn-on/off transient, current, inrush |
|
Operating voltage |
220V Version: 130-265 V / 110V Version: 65-135 V selectable |
|
Voltage Gain(dB) |
23, 26, 29, 32, 35, 38, 41, 44 dB selectable |
|
Input impedance |
20 Kohms |
|
Level adjustment (per ch.) |
Front-panel potentiometer, 31 position detented from -inf to 0 dB |
|
Dimensions (W×H×D) |
483×88×396mm |
|
Packing dimension |
560×180×500mm |
|
Net weight(kg) |
13.5 |
|
Gross weight(kg) |
18 |
Materials of FB-14K Subwoofer Power Amplifier:
){kind=link}