| Noise: | <95dB |
|---|---|
| Hi-Fi: | Not Hi-Fi |
| Activity: | Passive |
| Operation Mode: | Wire / Remote Control |
| Speaker System: | Optional Combination |
| Speaker Material: | Wood |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier K1 Dual 15 Inch 3 Way Passive Line Array Speaker System for Outdoor Live Show
Overview:
K1 line array speaker is a dual 15 inch 3 way large format compact design enclosure with adjustable curvature, perfect for large outdoor live show.
In the bass reflex speaker cabinet there are consists of two 15 inch low frequence speaker drivers, four 6.5 inch mid frequency speaker drivers, and three high frequency drivers with 3 inch voice coil mounted in the DOSC waveguides.
K1 passive line array speaker cabinet were made in first grade Russian birch plywood with water resistant Polyurea paint, and mounted Neodymium drivers inside. In the front of the K1 speaker is covered by a steel grill with anti-corrosion coating and acoustically neutral 3D fabric. The safety rigging hardware and two parallel 8-point PA-COM connectors are installed in a suitable position of the speaker cabinet.
K1 3 way passive line array usable system bandwidth is 35 Hz to 20 kHz (-10 dB).
The K-shaped coplanar speaker drivers configuration offer a polar coverage of 90° horizontal (-6 dB), controls the entire projected axi-symmetric pattern, has no side-lobes in the entire frequency range, and the number of independent vertically spaced elements. In mode, the system should bend each element to a maximum of 5°, and accept a 6-chassis down-fill line sound source array without destroying the wave-front.
Under the condition of free field at 1 meter, using pink noise with a crest factor of 10 decibels to measure the large sound pressure level, it should be 147 decibels. The long-term RMS processing capacity is 2×600W for the LF part, 600 watts for the MF part, and 220 watts for the high frequency part. The impedance of each part is 8 ohms.
Feature:
1. First grade Russian birch plywood: multiple thin layers, absence of voids, rigidity and rich density that facilities better clarity and tone. Its durability ensure you could keep the speaker for long time, and good for touring performance in a bumpy roads.
2. Water resistant Polyurea paint can withstand all kinds of friction and collisions.
3. Neodymium speaker drivers: 2x15" LF, 4x6.5" MF, 3x3" HF.
4. Advanced and safety rigging system for fast installation.
Application:
1. Outdoor Live Show;
2. Indoor Concert;
3. Music Festival;
4. Stadium;
5. Theater.
Specifications of K1 dual 15 Inch Line Array Speaker:
|
Usable bandwidth (-10 dB)
|
35 Hz - 20 kHz |
|
Maximum SPL |
149 dB |
|
Nominal directivity |
horizontal: 90° symmetric vertical: dependent upon the number of elements and the line source curvature |
|
Transducers
|
LF: 2x15"neodymium MF: 4 x 6.5" neodymium, direct radiation HF: 3 x 3" diaphragm compression drivers |
|
Acoustical load |
LF: bass-reflex MF: bass-reflex HF: DOSC waveguides |
|
Power (RMS) |
LF: 2X600W MF:600W HF:220W |
|
Nominal impedance |
LF: 2 x 8 Ω MF: 8 Ω HF: 8 Ω |
|
Connectors |
IN: 1 x 8-point PA-COM LINK: 1 x 8-point PA-COM |
|
Rigging and handling |
handles integrated in the cabinet inter-enclosure angles: 0°, 0.5°, 1°, 1.5°, 2°, 2.5°, 3°, 4° or 5°
|
|
Weight (net) |
106 kg / 234 lb |
|
Cabinet |
FIrst grade Russian birch plywood, high density polyethylene Front steel grill with anti-corrosion coating acoustically neutral 3D fabric |
|
Rigging components |
high grade steel with anti-corrosion coating |
|
Finish |
Dark Grey brown Pantone 426C |
|
Dimension |
134x44x52cm (WxHxD) |
|
Weight |
106KG |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}